We’ve all been in that situation. It’s hot and stuffy outside, and you want to keep the front door open to let some security doors prices. But that’s simply an invitation for criminals to come in and take anything they want. So, what are your options? According to TV commercials, you could install a sophisticated security door and allow in all the air and light you want while yet preventing someone from getting in.
The problem is that, although security doors prices do offer some degree of protection, given enough time and the proper technology, they are nonetheless penetrable — some more so than others. Then there’s the installation – connecting it to a shaky door frame or not providing enough room for adequate jimmying leverage decreases efficacy. So, if you think you need one, whether it’s a cheapie or an expensive Crimsafe, keep reading for tips on how to obtain security doors prices rather than simply a door.
What kind of security doors prices do I require?
It all depends on how much protection you need and the style you want for your house. If you reside in a high-crime area, you may want to consider an entrance doors with a steel grille. If you simply want to provide the impression of protection while keeping pests out, a robust aluminum door may suffice. An inexpensive aluminum bug screen may serve for people who just need an insect screen.
What to Look for When Buying a Security Door
There are many kinds of entrance doors available, each with a unique set of characteristics.
Meeting the Requirements
Unfortunately, in most jurisdictions, a “security doors prices” may only protect you from flies: the phrase is useless unless the door meets Australian Standard AS5039-2008. There is also an installation standard (AS5040), and you should get a written assurance from the installation provider that its work conforms.
You may come across claims that a door is comparable to a more well-known brand, such as Crimsafe. This may be difficult to verify; if in question, contact the business being used as a comparison.
The frame may be made of steel or aluminum. According to industry experts, the most effective security doors prices is a steel door (when properly built and fitted). If a steel door satisfies the Australian Standard, it will be corrosion-resistant.
Aluminum is less corrosive than steel.
The frame should include a deep receiver channel for the grille so that the edge does not readily push out of the frame. Check that the link between the main frame and the receiver channel is strong.
It should be strengthened at the corners as well. Internal corner stakes on entrance doors may be visible, but completely welded corner joints are likely to be stronger.
Steel (in the shape of bars or a decorative theme), aluminum grille, structural grade aluminum perforated sheet, or stainless-steel mesh may be used as infill.
Safest choice: Steel bars, patterns, or grilles
In most cases, aluminum grilles are little more than flyscreens. You can buy heavy-duty ones that at least seem to be secure.
Stainless steel mesh doors are constructed using frames made of aluminum or steel that are filled with woven stainless-steel mesh. These doors provide protection without obstructing your vision with bars and grilles – it’s similar to seeing through a flyscreens. Perforated structural grade aluminum sheets are new to the market. They have a similar appearance to stainless steel mesh but are less costly.
Do you need wireless security cameras?
The grille cables should be thick. Even the toughest grille isn’t worth much if it isn’t securely attached to the door frame. The grille on many doors is welded to the frame. Make sure there are no aluminum rivets in visible places on the door. Look for rivets that are fastened at the rear of the frame and aren’t too far apart: at least one per 25cm, and preferably every other connection point. However, rivets may be misaligned and therefore fail to completely connect with the grille.
Doors with screw clamps say that the screws keep the mesh in place better than those with plastic clamps; doors with plastic clamps claim that an aluminum frame in contact with stainless steel mesh reduces the danger of galvanic corrosion. We haven’t found any independent evidence to back up either allegation. A welded grille may be more dependable; again, no more than 25cm between welding sites and preferably at every connecting point.
Key locks should be of the five-pin cylinder kind or similar. Wafer locks are more prone to breakage. A three-point lock may prevent an attacker from wrenching the bottom or top of the door back, and it should help distribute the power of an assault. Some locks now come with a 25-year guarantee.
The door should have at least three hinges with non-removable fixed hinge pins. Additional protection is provided by a fixed steel pin (‘dog bolt’) that is welded into the hinge leaf rather than being pushed into it. The greater the size of the pin, the better. Ideally, the hinges should be recessed, or the door should have a hinge covering the gap between the door and the frame, preventing access for jimmying, for example. A single hinge that spans the whole length of the frame does the same thing.
Design on demand
Because installing security doors to satisfy standards may be a matter of centimeters, they should nearly always be custom-made.
Non-corrosive characteristics are provided by doors that satisfy the Australian Standard, regardless of whether the frame is made of aluminum or steel. Consider obtaining a hot-dip galvanized and powder-coated steel door to prevent rust in steel doors that do not meet the Australian Standard, particularly if you live near the water.